View VNL5090N3TR-E_7775194.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

this is information on a product in full production. november 2013 docid022568 rev 6 1/28 vnl5090n3-e vnl5090s5-e omnifet iii fully protected low-side driver datasheet - production data features ? automotive qualified ? drain current: 13 a ? esd protection ? overvoltage clamp ? thermal shutdown ? current and power limitation ? very low standby current ? very low electromagnetic susceptibility ? compliant with european directive 2002/95/ec ? open drain status output (root part number 2 only) ? specially intended for 2 x r10w or 4 x r5w automotive signal lamps description the vnl5090n3-e and vnl5090s5-e are monolithic devices made using stmicroelectronics ? vipower ? technology, intended for driving resistive or inductive loads with one side connected to the battery. built-in thermal shutdown protects the chip from overtemperature and short-circuit. output current limitation protects the devices in an overload condition. in case of long duration overload, the device limits the dissipated power to a safe level up to thermal shutdown intervention.thermal shutdown, with automatic restart, allows the devices to recover normal operation as soon as a fault condition disappears. fast demagnetization of inductive loads is achieved at turn-off. type v clamp r ds(on) i d vnl5090n3-e 41 v 90 m 13 a vnl5090s5-e 1 2 2 3 sot-223 so-8 table 1. devices summary package order codes tube tape and reel sot-223 vnl5090n3-e VNL5090N3TR-E so-8 vnl5090s5-e vnl5090s5tr-e www.st.com
contents vnl5090n3-e, vnl5090s5-e 2/28 docid022568 rev 6 contents 1 block diagrams and pins configurations . . . . . . . . . . . . . . . . . . . . . . . . 5 2 electrical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2.1 absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2.2 thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2.3 electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 3 application information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 3.1 mcu i/o protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 4 package and pc board thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 4.1 sot-223 thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 4.2 so-8 thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 5 package and packing information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 5.1 ecopack ? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 5.2 sot-223 mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 5.3 so-8 mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 5.4 sot-223 packing information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 5.5 so-8 packing information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 6 revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
docid022568 rev 6 3/28 vnl5090n3-e, vnl5090s5-e list of tables 3 list of tables table 1. devices summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 table 2. pin function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 table 3. suggested connections for unused and n.c. pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 table 4. absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 table 5. thermal data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 table 6. powermos section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 table 7. source drain diode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 table 8. input section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 table 9. status pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 table 10. logic input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 table 11. openload detection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 table 12. supply section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 table 13. switching characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 table 14. protection and diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 table 15. truth table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 table 16. sot-223 thermal parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 table 17. so-8 thermal parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 table 18. sot-223 mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 table 19. so-8 mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 table 20. document revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
list of figures vnl5090n3-e, vnl5090s5-e 4/28 docid022568 rev 6 list of figures figure 1. vnl5090n3-e block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 figure 2. vnl5090s5-e block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 figure 3. vnl5090n3-e current and voltage conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 figure 4. vnl5090s5-e current and voltage conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 figure 5. configuration diagrams (top view) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 figure 6. switching characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 figure 7. vnl5090n3-e application schematic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 figure 8. vnl5090s5-e application schematic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 figure 9. maximum demagnetization energy (v cc = 16 v) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 figure 10. sot-223 pc board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 figure 11. sot-223 rthj-amb vs pcb copper area in open box free air condition . . . . . . . . . . . . . . . 16 figure 12. sot-223 thermal impedance junction ambient single pulse. . . . . . . . . . . . . . . . . . . . . . . . 17 figure 13. thermal fitting model of a lsd in sot-223 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 figure 14. so-8 pc board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 figure 15. so-8 rthj-amb vs pcb copper area in open box free air condition . . . . . . . . . . . . . . . . . . 19 figure 16. so-8 thermal impedance junction ambient single pulse. . . . . . . . . . . . . . . . . . . . . . . . . . . 20 figure 17. thermal fitting model of a lsd in so-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 figure 18. sot-223 package dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 figure 19. so-8 package dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 figure 20. sot-223 tape and reel shipment (suffix ?tr?) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 figure 21. so-8 tube shipment (no suffix) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 figure 22. so-8 tape and reel shipment (suffix ?tr?) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 6
docid022568 rev 6 5/28 vnl5090n3-e, vnl5090s5-e block diagrams and pins configurations 27 1 block diagrams and pins configurations figure 1. vnl5090n3-e block diagram figure 2. vnl5090s5-e block diagram $2!). &rqwuro 'ldjqrvwlf /2*,& '5,9(5 &xuuhqw /lplwdwlrq 3rzhu &odps 29(57(03(5$785( 3527(&7,21 29(5/2$'3527(&7,21 $&7,9(32:(5/,0,7$7,21 ,1387 *1' ("1($'5 $2!). &rqwuro 'ldjqrvwlf /2*,& '5,9(5 &xuuhqw /lplwdwlrq 3rzhu &odps 2))6wdwh 2shqordg 29(57(03(5$785( 3527(&7,21 29(5/2$'3527(&7,21 $&7,9(32:(5/,0,7$7,21 ,1387 67$786 *1' 6833/< 6833/< 92/7$*( ("1($'5
block diagrams and pins configurations vnl5090n3-e, vnl5090s5-e 6/28 docid022568 rev 6 figure 3. vnl5090n3-e current and voltage conventions figure 4. vnl5090s5-e current and voltage conventions table 2. pin function name function input voltage controlled input pin with hysteresis, cmos compatible; it controls output switch state (1) 1. internally connected to v supply in the vnl5090n3-e drain powermos drain source powermos source and ground reference for the control section supply voltage supply voltage connected to the signal part (5 v) status open drain digital diagnostic pin (2) 2. valid for vnl5090s5-e only.
docid022568 rev 6 7/28 vnl5090n3-e, vnl5090s5-e block diagrams and pins configurations 27 figure 5. configuration diagrams (top view) table 3. suggested connections for unused and n.c. pins connection / pin status n.c. input floating x (1) 1. x: do not care. xx to ground not allowed x through 10 k resistor so-8 sot-223
electrical specifications vnl5090n3-e, vnl5090s5-e 8/28 docid022568 rev 6 2 electrical specifications 2.1 absolute maximum ratings stressing the device above the rating listed in the table 4 may cause permanent damage to the device. these are stress ratings only and operation of the device at these or any other conditions above those indicated in the operating sections of this specification is not implied. exposure to absolute maximum rating conditions for extended periods may affect device reliability. 2.2 thermal data table 4. absolute maximum ratings symbol parameter value unit sot-223 so-8 v ds drain-source voltage (v in = 0 v) internally clamped v i d dc drain current internally limited a -i d reverse dc drain current 12.5 a i s dc supply current ? -1 to 10 ma i in dc input current -1 to 10 ma i stat dc status current ? -1 to 10 ma v esd1 electrostatic discharge (r = 1.5 k ; c = 100 pf) ?drain ? supply, input, status 5000 4000 v v v esd2 electrostatic discharge on output pin only (r = 330 , c = 150 pf) 2000 v t j junction operating temperature -40 to 150 c t stg storage temperature -55 to 150 c e as single pulse avalanche energy (l = 1.1 mh, t j = 150c, r l = 0, i out = i liml ) 50 mj table 5. thermal data symbol parameter maximum value unit sot-223 so-8 r thj-amb thermal resistance junction-ambient 147 (1) 1. when mounted on a standard single-sided fr4 board with 0.5 cm 2 of cu (at least 35 m thick) connected to all drain pins 102 c/w
docid022568 rev 6 9/28 vnl5090n3-e, vnl5090s5-e electrical specifications 27 2.3 electrical characteristics values specified in this section are for v supply = v in = 4.5 v to 5.5 v, -40c < t j < 150c, unless otherwise stated. table 6. powermos section symbol parameter test conditions min. typ. max. unit v supply operating supply voltage 3.5 5 5.5 v r on on-state resistance i d = 1.6 a; t j = 25c; v supply = v in = 5 v 90 m i d = 1.6 a; t j = 150c; v supply = v in = 5 v 180 i d = 1.6 a; t j = 150c; v supply = v in = 4.5 v (1) 1. valid only for vnl5090n3-e. 190 v clamp drain-source clamp voltage v in = 0 v; i d = 1.6 a 414652 v v clth drain-source clamp threshold voltage v in = 0 v; i d = 2 ma 36 v i dss off-state output current v in = 0 v; v ds = 13 v; t j = 25c 03 a v in = 0 v; v ds = 13 v; t j = 125c 05 table 7. source drain diode symbol parameter test conditions min. typ. max. unit v sd forward on voltage i d = 1.6 a; v in = 0 v ? 0.8 ? v table 8. input section (1) 1. valid for vnl5090n3-e option (input and supply pins connected together) symbol parameter test conditions min. typ. max. unit i iss supply current from input pin on-state: v supply = v in = 5 v; v ds = 0 v 30 65 a v icl input clamp voltage i s = 1 ma 5.5 7 v i s = -1 ma -0.7 v inth input threshold voltage v ds = v in ; i d = 1 ma 1 3.5 v table 9. status pin (1) symbol parameter test conditions min. typ. max. unit v stat status low output voltage i stat = 1 ma 0.5 v i lstat status leakage current normal operation, v stat = 5 v 10 a
electrical specifications vnl5090n3-e, vnl5090s5-e 10/28 docid022568 rev 6 c stat status pin input capacitance normal operation, v stat = 5 v 100 pf v stcl status clamp voltage i stat = 1 ma 5.5 7 v i stat = -1 ma -0.7 1. valid for vnl5090s5-e option table 10. logic input (1) 1. valid for vnl5090s5-e option symbol parameter test conditions min. typ. max. unit v il low-level input voltage 0.9 v i il low-level input current v in = 0.9 v 1 a v ih high-level input voltage 2.1 v i ih high-level input current v in = 2.1 v 10 a v i(hyst) input hysteresis voltage 0.13 v v icl input clamp voltage i in = 1 ma 5.5 7 v i in = -1 ma -0.7 table 11. openload detection (1) 1. valid for vnl5090s5-e option symbol parameter test conditions min. typ. max. unit v ol openload off-state voltage detection threshold v in = 0 v 0.6 1.2 1.7 v t d(oloff) delay between input falling edge and status falling edge in openload condition i out = 0 a 45 425 1100 s table 12. supply section (1) 1. valid for vnl5090s5-e option symbol parameter test conditions min. typ. max. unit i s supply current off-state; t j = 25c; v in = v drain = 0 v; 10 25 a on-state; v in = 5 v; v ds = 0 v 25 65 v scl supply clamp voltage i scl = 1 ma 5.5 7 v i scl = -1 ma -0.7 table 9. status pin (1) (continued) symbol parameter test conditions min. typ. max. unit
docid022568 rev 6 11/28 vnl5090n3-e, vnl5090s5-e electrical specifications 27 table 13. switching characteristics (1) 1. see figure 7: vnl5090n3-e application schematic and figure 8: vnl5090s5-e application schematic symbol parameter test conditions sot-223 (2) 2. 3.5 v v supply = v in 5.5 v so-8 unit min. typ. max min. typ. max. t d(on) turn-on delay time r l = 8.2 , v cc = 13 v (3) 3. see figure 6: switching characteristics ?8??8?s t d(off) turn-off delay time r l = 8.2 , v cc = 13 v (3) ?3.4?? 18 ?s t r rise time r l = 8.2 , v cc = 13 v (3) ?10??10 ?s t f fall time r l = 8.2 , v cc = 13 v (3) ?2.7?? 10 ?s w on switching energy losses at turn-on r l = 8.2 , v cc = 13 v (3) ?57??57?j w off switching energy losses at turn-off r l = 8.2 , v cc = 13 v (3) ?14??55?j table 14. protection and diagnostics symbol parameter test conditions (1) 1. v supply = v input in vnl5090n3-e version. min. typ. max. unit i limh dc short-circuit current v ds = 13 v; v supply = v in = 5 v 13 18 25 a i liml short-circuit current during thermal cycling v ds = 13 v; t r < t j < t tsd ; v supply = v in = 5 v 8a t dliml step response current limit v ds = 13 v; v input = 5 v 44 s t tsd shutdown temperature 150 175 200 c t r (2) 2. valid for vnl5090s5-e option. reset temperature t rs + 1 t rs + 5 c t rs (3) thermal reset of status 135 c t hyst thermal hysteresis (t tsd - t r ) 7c
electrical specifications vnl5090n3-e, vnl5090s5-e 12/28 docid022568 rev 6 figure 6. switching characteristics table 15. truth table (1) 1. valid for vnl5090s5-e option conditions input drain status normal operation l h h l h h current limitation l h h x h h overtemperature l h h h h l undervoltage l h h h x x output voltage < v ol l h l l l h
docid022568 rev 6 13/28 vnl5090n3-e, vnl5090s5-e application information 27 3 application information figure 7. vnl5090n3-e application schematic figure 8. vnl5090s5-e application schematic ("1($'5 9 '5$,1 6285&( 5surw ,1387 5 / 9ff 0lfur&rqwuroohu ("1($'5 96833/< 9 67$786 '5$,1 6285&( 5surw 5surw 5vxsso\ ,1387 9 5 / 9ff 0lfur&rqwuroohu n
application information vnl5090n3-e, vnl5090s5-e 14/28 docid022568 rev 6 3.1 mcu i/o protection st suggests to insert a resistor (r prot ) in line to prevent the microcontroller i/o pins from latching up (a) . the value of these resistors is a compromise between the leakage current of microcontroller and the current required by the lsd i/os (input levels compatibility) with the latch-up limit of microcontroller i/os: equation 1 let: ? i latchup > 20 ma ? v ohc > 4.5 v ? 35 r prot 100 k then, the recommended value is r prot = 1 k figure 9 shows the turn-off current drawn during the demagnetization. a. in case of negative transient on the drain pin. 0.7 i latchup -------------------- r prot v oh c v ih ? () i ih max --------------------------------------- - ?
docid022568 rev 6 15/28 vnl5090n3-e, vnl5090s5-e application information 27 figure 9. maximum demagnetization energy (v cc = 16 v) 1. the voltage supply is v cc = 13.5 v. *$3*&)7 ,$ /p+ 91/ 0d[lpxpwxuqriifxuuhqwyhuvxvlqgxfwdqfh 91/6lqjoh3xovh 5hshwlwlyhsxovh7mvwduw ?& 5hshwlwlyhsxovh7mvwduw ?& (>p-@ 7ghpdj>pv@ 91/ 0d[lpxpwxuqrii(qhuj\yhuvxv7ghpdj 91/6lqjoh3xovh 5hshwlwlyhsxovh7mvwduw ?& 5hshwlwlyhsxovh7mvwduw ?&
package and pc board thermal data vnl5090n3-e, vnl5090s5-e 16/28 docid022568 rev 6 4 package and pc board thermal data 4.1 sot-223 thermal data figure 10. sot-223 pc board note: layout condition of r th and z th measurements (pcb fr4 area = 30 mm x 58 mm, pcb thickness = 2 mm, cu thickness = 35 m, copper areas: from minimum pad lay-out to 0.8 cm 2 ). figure 11. sot-223 r thj-amb vs pcb copper area in open box free air condition gapgcft00530 24(j?amb &: 57+mdpe 3&%&xkhdwvlqnduhdfpa uhihuwr3&%od\rxw irrwsulqw *$3*&)7
docid022568 rev 6 17/28 vnl5090n3-e, vnl5090s5-e package and pc board thermal data 27 figure 12. sot-223 thermal impedance junction ambient single pulse equation 2: pulse calculation formula where = t p /t figure 13. thermal fitting model of a lsd in sot-223 note: the fitting model is a semplified thermal tool and is valid for transient evolutions where the embedded protections (power limitation or thermal cycling during thermal shutdown) are not triggered. =7+?&: 7lphv &xirr wsulqw &x fp *$3*&)7 z th r th ? z thtp 1 ? () + = gapgcft00533
package and pc board thermal data vnl5090n3-e, vnl5090s5-e 18/28 docid022568 rev 6 table 16. sot-223 thermal parameters area/island (cm 2 ) footprint 2 r1 (c/w) 0.8 r2 (c/w) 1 r3 (c/w) 4.5 r4 (c/w) 24 r5 (c/w) 0.1 r6 (c/w) 115 45 c1 (w.s/c) 0.00004 c2 (w.s/c) 0.0003 c3 (w.s/c) 0.03 c4 (w.s/c) 0.16 c5 (w.s/c) 1000 c6 (w.s/c) 0.4 2
docid022568 rev 6 19/28 vnl5090n3-e, vnl5090s5-e package and pc board thermal data 27 4.2 so-8 thermal data figure 14. so-8 pc board note: layout condition of r th and z th measurements (pcb fr4 area = 58 mm x 58 mm, pcb thickness = 2 mm, cu thickness = 35 m (front and back side), copper areas: from minimum pad lay-out to 2 cm 2 ). figure 15. so-8 r thj-amb vs pcb copper area in open box free air condition gapgcft00534 24(j?amb &: 57+mdpe 3&%&xkhdwvlqnduhdfpa uhihuwr3&%od\rxw irrwsulqw *$3*&)7
package and pc board thermal data vnl5090n3-e, vnl5090s5-e 20/28 docid022568 rev 6 figure 16. so-8 thermal impedance junction ambient single pulse equation 3: pulse calculation formula where = t p /t figure 17. thermal fitting model of a lsd in so-8 note: the fitting model is a semplified thermal tool and is valid for transient evolutions where the embedded protections (power limitation or thermal cycling during thermal shutdown) are not triggered. =7+?&: 7lphv &x irrwsulqw &x fp *$3*&)7 z th r th ? z thtp 1 ? () + = gapgcft00533
docid022568 rev 6 21/28 vnl5090n3-e, vnl5090s5-e package and pc board thermal data 27 table 17. so-8 thermal parameters area/island (cm 2 ) footprint 2 r1 (c/w) 0.8 r2 (c/w) 2.7 r3 (c/w) 3.5 r4 (c/w) 21 r5 (c/w) 16 r6 (c/w) 58 28 c1 (w.s/c) 0.00005 c2 (w.s/c) 0.001 c3 (w.s/c) 0.0075 c4 (w.s/c) 0.045 c5 (w.s/c) 0.35 c6 (w.s/c) 1.05 2
package and packing information vnl5090n3-e, vnl5090s5-e 22/28 docid022568 rev 6 5 package and packing information 5.1 ecopack ? in order to meet environmental requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack ? specifications, grade definitions and product status are available at: www.st.com . ecopack ? is an st trademark. 5.2 sot-223 mechanical data figure 18. sot-223 package dimensions 0046067
docid022568 rev 6 23/28 vnl5090n3-e, vnl5090s5-e package and packing information 27 5.3 so-8 mechanical data figure 19. so-8 package dimensions table 18. sot-223 mechanical data dim. mm. inch min. typ. max. min. typ. max. a1.80.071 b 0.6 0.7 0.85 0.024 0.027 0.033 b1 2.9 3 3.15 0.114 0.118 0.124 c 0.24 0.26 0.35 0.009 0.01 0.014 d 6.3 6.5 6.7 0.248 0.256 0.264 e2.3 0.09 e1 4.6 0.181 e 3.3 3.5 3.7 0.13 0.138 0.146 h 6.7 7 7.3 0.264 0.276 0.287 v 10 (max) a1 0.02 0.1 0.0008 0.004 gapgcft00145
package and packing information vnl5090n3-e, vnl5090s5-e 24/28 docid022568 rev 6 table 19. so-8 mechanical data symbol millimeters min. typ. max. a 1.75 a1 0.10 0.25 a2 1.25 b0.28 0.48 c0.17 0.23 d (1) 1. dimensions d does not include mold flash, protrusions or gate burrs. mold flash, potrusions or gate burrs shall not exceed 0.15 mm in total (both side). 4.80 4.90 5.00 e 5.80 6.00 6.20 e1 (2) 2. dimension ?e1? does not include in terlead flash or protrusions. interl ead flash or protrusions shall not exceed 0.25 mm per side. 3.80 3.90 4.00 e1.27 h0.25 0.50 l0.40 1.27 l1 1.04 k0 8 ccc 0.10
docid022568 rev 6 25/28 vnl5090n3-e, vnl5090s5-e package and packing information 27 5.4 sot-223 packing information the devices can be packed in tube or tape and reel shipments (see the table 1: devices summary on page 1 ). figure 20. sot-223 tape and reel shipment (suffix ?tr?) reel dimensions base q.ty 1000 bulk q.ty 1000 a (max) 330 b (min) 1.5 c ( 0.2) 13 f 20.2 g (+ 2 / -0) 12.4 n (min) 60 t (max) 18.4 tape dimensions according to electronic industries association (eia) standard 481 rev. a, feb. 1986 all dimensions are in mm. tape width w 12 tape hole spacing p0 ( 0.1) 4 component spacing p 8 hole diameter d (+ 0.1/-0) 1.5 hole diameter d1 (min) 1.5 hole position f ( 0.05) 5.5 compartment depth k (max) 4.5 hole spacing p1 ( 0.1) 2 top cover tape end start no components no components components 500mm min 500mm min empty components pockets saled with cover tape. user direction of feed
package and packing information vnl5090n3-e, vnl5090s5-e 26/28 docid022568 rev 6 5.5 so-8 packing information figure 21. so-8 tube shipment (no suffix) figure 22. so-8 tape and reel shipment (suffix ?tr?) all dimensions are in mm. base q.ty 100 bulk q.ty 2000 tube length ( 0.5) 532 a 3.2 b 6 c ( 0.1) 0.6 c b a tape dimensions according to electronic industries association (eia) standard 481 rev. a, feb. 1986 all dimensions are in mm. tape width w 12 tape hole spacing p0 ( 0.1) 4 component spacing p 8 hole diameter d (+ 0.1/-0) 1.5 hole diameter d1 (min) 1.5 hole position f ( 0.05) 5.5 compartment depth k (max) 4.5 hole spacing p1 ( 0.1) 2 top cover tape end start no components no components components 500mm min 500mm min empty components pockets saled with cover tape. user direction of feed reel dimensions all dimensions are in mm. base q.ty 2500 bulk q.ty 2500 a (max) 330 b (min) 1.5 c ( 0.2) 13 f 20.2 g (+ 2 / -0) 12.4 n (min) 60 t (max) 18.4
docid022568 rev 6 27/28 vnl5090n3-e, vnl5090s5-e revision history 27 6 revision history table 20. document revision history date revision changes 15-dec-2011 1 initial release. 20-jan-2012 2 table 4: absolute maximum ratings : ?-i d : updated value 18-apr-2012 3 updated features list 10-aug-2012 4 updated table 13: switching characteristics 18-sep-2013 5 updated disclaimer. 13-nov-2013 6 updated features list table 8: input section : ?i iss : updated maximum value table 12: supply section : ?i is : updated maximum value updated figure 7: vnl5090n3-e application schematic and figure 8: vnl5090s5-e application schematic updated section 3.1: mcu i/o protection
vnl5090n3-e, vnl5090s5-e 28/28 docid022568 rev 6 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a particular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. st products are not designed or authorized for use in: (a) safety critical applications such as life supporting, active implanted devices or systems with product functional safety requirements; (b) aeronautic applications; (c) automotive applications or environments, and/or (d) aerospace applications or environments. where st products are not designed for such use, the purchaser shall use products at purchaser?s sole risk, even if st has been informed in writing of such usage, unless a product is expressly designated by st as being intended for ?automotive, automotive safety or medical? industry domains according to st product design specifications. products formally escc, qml or jan qualified are deemed suitable for use in aerospace by the corresponding governmental agency. resale of st products with provisions different from the statem ents and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or register ed trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2013 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - swed en - switzerland - united kingdom - united states of america www.st.com

▲Up To Search▲

Price & Availability of VNL5090N3TR-E

	To Download VNL5090N3TR-E Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .